XW Woofers utilize a T-shaped Pole design with dual shorting rings above and below the magnetic gap for a very stable magnetic field resulting in ultra-low distortion and low power compression
Large diameter voice coils enable massive sustained power handling. Voice coils are constructed of pure aluminum for light weight and improved thermal performance. The flat wound flat wire transfers heat more efficiently and allow the use of a smaller magnetic gap for a higher motor strength
Increases the volume of displacement of the subwoofer without limiting excursion is the true measure of output capability. Starting with the largest possible static displacement creates the largest dynamic displacement. (12″ Sd = 585 cm², 15″ = 960 cm²)
|Continuous Power Handling (RMS)||1000 W|
|Recommended power range||300-1000W|
|Nominal Impedance (Znom)||Dual 4 Ω|
|Mounting Depth||7.93″ / 201.5mm|
|Parameters||XW12 D2||XW12 D4|
|DC Resistance (Re)||0.95||1.47|
|Free Air Resonance (Fs)||21.166||24.261|
|Electrical “Q” (Qes)||0.592||0.733|
|Mechanical “Q” (Qms)||3.294||3.824|
|Total Speaker “Q” (Qts)||0.502||0.615|
|Equivalent Compliance (Vas) LITERS||103.872||80.508|
|Effective Piston Area (Sd)||585||585|
|Efficiency (1 W / 1 m)**||84||83.8|
|One-Way Linear Excursion (Xmax)*||23||23|
SEALED AND PORTED DESIGNS
All design are subject to change .
|Volume||1.5 Ft³ / 42.47 L||volume||2.5 Ft³ / 70.79 L|
|Box wall thickness||.75″ / 19.05mm||Box wall thickness||.75″ / 19.05mm|
|Box external (W)||15″ / 38.1 cm||Box external (W)||18 ” / 45.72 cm|
|Box external (D)||19″ / 48.26 cm||Box external (D)||22.7″ / 49.53 cm|
|Box external (H)||15″ / 38.1 cm||Box external (H)||18″ / 45.72 cm|
|F3||33 Hz||Round port||4″ X 12.20″ long or 101.6mm X 309.88mm|
|QTC||.7 _||Tuning frequency||30 Hz|
Oncore Audio warrants its products to be free from defects in material and workmanship for a period of One year from the date of shipment within North America.
If you believe any ONCORE Audio product that you have purchased has a defect in material or workmanship or has failed during normal use within the warranty period, please contact ONCORE at 626-465-3383 for assistance.
Upon inspection by ONCORE Audio, should product repair or replacement be deemed necessary under this warranty to manufacturing defects, ONCORE Audio will, at its sole discretion, repair or replace the defective product with a new or re-manufactured product at no charge. The Customer will be solely responsible for all shipping charges, freight, insurance, and proper packaging to prevent damage or breaking in transit. All shipments of repaired or replaced products by Oncore Audio will be FOB from Oncore Audio at 859 Lawson Street, City of Industry, CA. 91748
Technical Support should be pursued through channels offered by Oncore Tech Support. ONCORE Audio accepts no liability caused by aftermarket software or hardware modifications or additions. ONCORE Audio is not responsible for giving any technical support concerning the installation or integration of its products the customer did not pay to install. ONCORE Audio is not responsible for a loss of time, even with product failure. Customers are responsible for making sure the installation of the product is done correctly.
ONCORE Audio is not responsible for any loss of work (“down time”) caused by a product requiring service.
This warranty is null and void if the defect or malfunction was due to damage resulting from operation not within manufacturer specifications. It will also be null and void if there are indications of misuse and/or abuse. ONCORE Audio has the option of voiding the warranty if anyone other than an ONCORE technician attempts to service the product. ONCORE Audio will not warrant any problems arising from an act of God (lightning, flooding, tornado, etc.), electrical spikes or surges, or problems arising out of hardware, software, or additional devices added to complement any system/component.
Under no circumstances will ONCORE Audio be responsible for any refund or remuneration exceeding the original purchase price of the product less any shipping fees. ONCORE Audio will not be held responsible for typographical errors on sales receipts, repair tickets, or on our website. ONCORE Audio makes every effort to make sure all information on our website is correct. This warranty is limited and does not cover claims for damage caused by misuse, abuse, neglect, alteration, or burnt/overheated voice coils, normal wear and tear, and is limited to material failures or defects arising from normal use.
RETURN MERCHANDISE AUTHORIZATION (RMA)
If repairs are required, the customer must obtain an RMA number and provide proof of purchase. RMA and services are rendered by ONCORE Audio only. Any shipping costs after 30 days (starting from the original date of purchase) on any item returned for repair is the customers’ responsibility. All returned parts must have an RMA number written clearly on the outside of the package along with a letter detailing the problems and a copy of the original proof of purchase. No COD packages will be accepted. No package will be accepted
without an RMA number written on the outside of the package. RMA numbers are only valid for 30 days from the date of issue.
Should you have any problems with your ONCORE product, please follow these procedures to obtain the service:
ONCORE Repair Department
RMA#____________ 859 Lawson St. City of Industry, CA 91748
What will the XW woofers work best in
What is the Mounting Depth
Does the grille come with the XW woofer