Gone are the days of the wonderless sounding Class-D. Now we have an audiophile-grade Class-D design, full differential-balanced inputs /10 to 30k full-range Class-D design/crossovers highpass/lowpass/full-range selected from front panel and can be configured into a band-pass /audio input: Stereo RCA on front panel with pass through channels / Internal fan cooling / all controls and power input are mounted on the same side of the amplifier
The new OnCore P-Series amplifiers use the latest technologies to create audiophile-grade sound with efficiency, gone are the days of MP3 sounding /tubthumping and unsatisfactory timbre
With our Full-Range designs in all models, OnCore brings life back to music
|X-overs Highpass/Lowpass/Full-range selected from front panel via toggle switch Channels 1/2|
|X-overs Highpass/Lowpass/Full-range selected from front panel and can be configured into a Band-pass via push button switches on front panel for Channels 3/4|
|X-overs Highpass/Lowpass/Full-range selected from front panel and can be configured into a Band-pass via push button switches on front panel for Channels 5/6|
|X-over range high pass filters 50hz to 500hz (X1) and 500hz to 5000hz (X10) range selected by a switch on front panel. Value is set using a potentiometer on front panel|
|X-over range Lowpass filters 50hz to 500hz (X1) and 500hz to 5000hz (X10) range selected by a switch on front panel. Value is set using a potentiometer on front panel|
|X-over range Sub Sonic filter 10hz to 100hz Value is set using a potentiometer on front panel and a switch is used for engaging and disengaging circuit|
|Gain control per stereo channels are selected through a potentiometer with control values of 8volts to .25volts of input (differential input design)|
|Audio input: Stereo RCA on front panel with pass-through channels|
|Fuse on front panel (single ATC style fuse set at 40 amps)|
|Power input: 4 gauge for both power and ground on a single block|
|Remote turn on (12volts)|
|Impedance range (4/2-ohm Stereo and 4 ohm Bridge only)|
|Internal fan cooling|
|Power and protection via separate light emitting diode (green for power on and red for protection)|
|Protection systems (thermal 170 degrees / under voltage 11 volts / over voltage 15.5 volts / dead short / low impedance / reverse power connection / lack of remote turn on voltage)|
|All controls and power are mounted on single side of amplifier|
|Class||Full Digtal||Full Digtal||Full Digtal||Full Digtal||Full Digtal||Full Digtal|
|Power Output(RMS)||4 Ω, 1KHz||V||128||127||128||127||170||174|
|Class D = THD 1%||2 Ω, 1KHz||W||183||185||186||183||251||247|
|1 Ω, 1KHz||W||N.A||N.A||N.A||N.A||N.A||N.A|
|4 Ω, 1KHz,Bridged||W||376||376||380||380||508||508|
|2 Ω, 1KHz,Bridged||W||N.A||N.A||N.A||N.A||N.A||N.A|
|THD Continuous||A-Weight 10watts4Ω1Khz||%||0.008||0.008||0.013||0.015||0.016||0.02|
|Channel Unbalance||4 Ω, 1KHz||dB||0||0.1||0.1||0||0||0|
|Channel Separation||4 Ω, 1KHz, RMS||dB||75||75||75||77||57||57|
|S/N Ratio||4 Ω, 1KHz||dB||80||86||88||86||86||86|
|Power Band Width (Freq. Response)||4Ω, ±1dB ＠ 10W||Hz||10||10||10||10||10||10|
|4Ω, ±1dB ＠ 10W||KHz||22||22||22||22||22||22|
|Input Sensitivity (Min-Max)||Low Input||mV||0.25~7.5||0.25~7.5||0.25~7.5||0.25~7.5||0.26~7.7||0.26~7.7|
|Low Pass Filter||-3dB||㎐||53~500||53~500||53~522||53~522||55~491||55~491|
|High Pass Filter||-3dB||㎐||54~540||54~540||52~546||52~546||54~550||54~550|
|Band Pass Filter||-3dB||㎐||N.A||N.A||54~5.2K||54~5.2K||53~5K||53~5K|
|Bass Boost Freq.||Frequency||㎐||N.A||N.A||N.A||N.A||N.A||N.A|
|Bass Boost Gain||Gain||dB||N.A||N.A||N.A||N.A||N.A||N.A|
|Phase Shift||at 100Hz||˚||N.A||N.A||N.A||N.A||N.A||N.A|
|Remote Gain control||at 100Hz||dB||N.A||N.A||N.A||N.A||0~16||0~16|
|Damping Factor||4 Ω, 10W ＠ 100Hz||106||105||107||106||80||158|
|Efficiency||4 Ω, RMS||%||82.4||82.4||82.4||82.4||82.4||82.4|
|Power Consumption||Idle Current||A||1.63||1.63||1.63||1.63||1.63||1.63|
|Rated out ＠ 4 Ω||A||72|
|Rated out ＠ 2 Ω||A||124|
|Rated out ＠ 1 Ω||A||N.A||N.A||N.A||N.A||N.A|
|Bridged out ＠ 4 Ω||A||125|
|Bridged out ＠ 2 Ω||A||N.A||N.A||N.A||N.A||N.A|
|Dimension||Length x Width x Height||mm||482x196x54||482x196x54||482x196x54||482x196x54||482x196x54||482x196x54|
Oncore Audio warrants its products to be free from defects in material and workmanship for a period of One year from the date of shipment within North America.
If you believe any ONCORE Audio product that you have purchased has a defect in material or workmanship or has failed during normal use within the warranty period, please contact ONCORE at 626-465-3383 for assistance.
Upon inspection by ONCORE Audio, should product repair or replacement be deemed necessary under this warranty to manufacturing defects, ONCORE Audio will, at its sole discretion, repair or replace the defective product with a new or re-manufactured product at no charge. The Customer will be solely responsible for all shipping charges, freight, insurance, and proper packaging to prevent damage or breaking in transit. All shipments of repaired or replaced products by Oncore Audio will be FOB from Oncore Audio at 859 Lawson Street, City of Industry, CA. 91748
Technical Support should be pursued through channels offered by Oncore Tech Support. ONCORE Audio accepts no liability caused by aftermarket software or hardware modifications or additions. ONCORE Audio is not responsible for giving any technical support concerning the installation or integration of its products the customer did not pay to install. ONCORE Audio is not responsible for a loss of time, even with product failure. Customers are responsible for making sure the installation of the product is done correctly.
ONCORE Audio is not responsible for any loss of work (“down time”) caused by a product requiring service.
This warranty is null and void if the defect or malfunction was due to damage resulting from operation not within manufacturer specifications. It will also be null and void if there are indications of misuse and/or abuse. ONCORE Audio has the option of voiding the warranty if anyone other than an ONCORE technician attempts to service the product. ONCORE Audio will not warrant any problems arising from an act of God (lightning, flooding, tornado, etc.), electrical spikes or surges, or problems arising out of hardware, software, or additional devices added to complement any system/component.
Under no circumstances will ONCORE Audio be responsible for any refund or remuneration exceeding the original purchase price of the product less any shipping fees. ONCORE Audio will not be held responsible for typographical errors on sales receipts, repair tickets, or on our website. ONCORE Audio makes every effort to make sure all information on our website is correct. This warranty is limited and does not cover claims for damage caused by misuse, abuse, neglect, alteration, or burnt/overheated voice coils, normal wear and tear, and is limited to material failures or defects arising from normal use.
RETURN MERCHANDISE AUTHORIZATION (RMA)
If repairs are required, the customer must obtain an RMA number and provide proof of purchase. RMA and services are rendered by ONCORE Audio only. Any shipping costs after 30 days (starting from the original date of purchase) on any item returned for repair is the customers’ responsibility. All returned parts must have an RMA number written clearly on the outside of the package along with a letter detailing the problems and a copy of the original proof of purchase. No COD packages will be accepted. No package will be accepted
without an RMA number written on the outside of the package. RMA numbers are only valid for 30 days from the date of issue.
Should you have any problems with your ONCORE product, please follow these procedures to obtain the service:
ONCORE Repair Department
RMA#____________ 859 Lawson St. City of Industry, CA 91748
Oncore Full-range Amplifier?